+86 15539197017
Used 2800mm writing and printing paper machine for sale. 90–130 TPD, 400–500 m/min, 42 dryers, film size press and soft calender. Export and installation support.
We offer a complete used 2800mm paper machine designed for the production of writing and printing paper. With an operating speed of approximately 400–500 m/min and an estimated daily capacity of 90–130 tons, this machine provides a practical solution for paper mills seeking to expand production while reducing initial equipment investment.
The production line features a Fourdrinier forming section with a top former, a multi-stage press section, 42 drying cylinders, a film size press, a four-roll soft calender, an automatic reel system, and a separate rewinder.
Compared with purchasing a completely new production line, this used paper machine offers the potential for significant capital savings while retaining essential industrial papermaking equipment.
| Parameter | Specification |
|---|---|
| Machine Type | Used writing and printing paper machine |
| Machine Width | 2800 mm |
| Paper Grades | Writing and printing paper |
| Operating Speed | Approx. 400–500 m/min |
| Daily Capacity | Approx. 90–130 tons |
| Forming System | Fourdrinier with top former |
| Wire Section Length | 18 m |
| Drying Cylinders | 42 units |
| Dryer Diameter | 1500 mm |
| Dryer Face Width | 3280 mm |
| Size Press | Film size press |
| Size Press Roll Diameter | 900 mm |
| Calender | Four-roll soft calender |
| Reel System | Automatic reel with spool storage |
| Moisture Control | Scanning moisture measurement system |
| Rewinder | Separate bottom-feed rewinder |
| Rewinder Speed | Up to 1500 m/min |
| Dryer Hood | Enclosed hood |
| Electric Motors | Included |
| Electrical Cabinets | Not included |
Actual production capacity depends on paper grammage, raw materials, equipment condition, steam supply, and operating parameters.
The machine is equipped with a hydraulic headbox manufactured by Zhejiang Zhuji Zhongtai Paper Machinery Co., Ltd.
The Fourdrinier wire section is approximately 18 meters long and incorporates an additional top former.
This configuration supports efficient sheet formation and improved water removal before the paper web enters the press section.
The combination of a Fourdrinier wire and top former provides greater dewatering capability than a conventional single-wire arrangement.
The press section includes:
Vacuum-assisted wet web transfer
Four-roll, three-nip press arrangement
Additional conventional press
This configuration is designed to remove water mechanically before the drying process.
Effective pressing can help reduce the moisture load entering the dryer section and support stable machine operation.
The drying section consists of 42 cylinders with a diameter of 1500 mm and a face width of 3280 mm.
An enclosed dryer hood supports controlled removal of hot, humid air and helps maintain more consistent drying conditions.
The drying system is suitable for industrial writing and printing paper production.
The machine includes a film size press manufactured by DAZHI PAPER MACHINERY, equipped with 900 mm diameter sizing rolls.
Surface sizing is an important process in writing and printing paper production.
Its main functions include:
Improving paper surface strength
Reducing surface dusting
Enhancing printing performance
Improving surface quality and consistency
The film size press provides an important finishing stage for paper intended for printing and writing applications.
The production line is equipped with a four-roll soft calender manufactured by Jiangyang Guoguang.
The calender is designed to improve paper smoothness, surface uniformity, and finishing quality.
This equipment is particularly valuable for producing writing and printing paper with consistent surface characteristics.
An automatic reel system with spool storage is installed at the end of the main paper machine.
The spool storage arrangement helps prepare reel spools for roll changes and improves operational convenience.
This system forms part of the main paper machine and is separate from the rewinding equipment.
A separate bottom-feed rewinder is included in the equipment package.
Maximum rewinding speed: up to 1500 m/min.
The rewinder is used for slitting and rewinding large parent rolls into finished rolls of the required widths and diameters.
The machine includes a scanning moisture measurement system.
This system provides operators with information about paper moisture during production, helping them adjust operating conditions and maintain more consistent product quality.
The purchase price of a suitable used paper machine may be approximately 50% of that of a comparable new machine, depending on its condition, configuration, and refurbishment requirements.
This allows investors to allocate more of their budget to other important project components, such as:
Pulp preparation equipment
Steam and boiler systems
Factory buildings and foundations
Electrical cabinets and control systems
Transportation and installation
Maintenance and refurbishment
With an estimated production capacity of 90–130 tons per day, this machine may be suitable for medium-capacity writing and printing paper projects.
It can be considered by investors planning a new paper mill or expanding an existing facility.
Lower equipment acquisition costs may reduce initial capital requirements and potentially improve project payback.
However, actual profitability depends on raw material costs, energy consumption, labor, transportation, refurbishment, operating efficiency, and finished paper selling prices.
We recommend evaluating the complete project investment before making a purchasing decision.
Purchasing a used paper machine requires careful planning for dismantling, packing, transportation, and reinstallation.
We can assist customers with:
Equipment inspection and technical evaluation
Professional dismantling and component identification
Packing and loading arrangements
International shipping coordination
Mechanical refurbishment when required
Technical guidance during reinstallation
Proper component identification and packing help simplify the subsequent installation process.
Our engineering team can provide technical assistance for machine installation and commissioning at the customer's paper mill.
Available services include mechanical installation guidance, equipment adjustment, trial production support, operating parameter optimization, and operator training.
The scope of technical services can be discussed according to the customer's project requirements.
Are you planning to establish or expand a writing and printing paper mill?
Contact us for further information about this used 2800mm paper machine.
We can provide equipment photographs, technical specifications, available component lists, condition information, and a commercial quotation.
Please tell us your destination country, required paper grade, target production capacity, and project schedule.
Contact us to discuss your paper mill investment and equipment requirements.
linked
